MainPage

  • Rotogravure Printing Technology

    • 3 printing machines that use rotogravure printing technology.
    • Creating solutions which don't compromise colour quality by using machines with 9 printing units.
    • Printing in 0-200 mic. spacing thickness on opp, pvc, cpp, pet and alu paper material.
    • Options of simultaneously using over print and reverse print on printing lines.

  • Lamination Technology

    • 3 lamination machines that have double tunnel drying units.
    • Independent lamination as well as tandem functioning triplex lamination possibilities.
    • Options of lamination with or without solvents.
    • Semiflexo lamination options.
    • Offline partial lamination, partial cold seal and partial heat seal options.
    • Partial lamination options.

  • Cone Sleeve Production Technology

    • Production of every kind of cone sleeve and cone lid that the ice cream industry could require.
    • Flexibility to work with all companies within the industry due to the production of 12 sizes of cone sleeve.

  • Slitting Technology

    • 5 slitting machines which can function at various speeds and measurements.
    • 3 inspection machines which are used after the slitting process.
    • Facilities that enable slitting from 200mm to 1.500 mm.
    • Wraparound for 1000 mm outer radius and 8 different inner radious measurements.
    • Slitting of all kinds of material within thickness of 10-300 mic.

  • Squeeze Up Technology

    • Special production line for liquid fill products in the ice cream industry.
    • Flexibility to work with all companies within the industry due to the production of 5 different sizes with the lids.

  • Offset Printing Technology

    • Printing on cardboard with 90 gsm - 700 gsm spacing using conventional ink.
    • Printing on Alu, metallised OPP and PE covered cardboard using UV ink.
    • Use of dispersion and UV Lac.

  • Offset Punchıng And Gluing Technology

    • Production of boxes using a machine that can stick boxes at up to 6 points.
    • 4 offset punching machines which feed on layers of different thickness.
    • Metallization (hot foil stamp) and gloss that work independently of cutting.

  • Extrusion Technology

    • Production line of material packaging in a range of 30 gsm paper to 500 gsm cardboard.
    • Packaging of polymer and copolymer in a range of 8 gsm – 50 gsm.
    • Lamination of two different materials using polymer technology.
    • Corona application to front and rear surfaces.
    • Barrier cardboard production using extrusion casing especially for cleaning products.
    • Special production line in view of producing fruit juice foil for juice producers.

  • Shrink Sleeve Production Technology

    • Casing production suitable for the whole food industry using pet and pvc film material which can be shaped using heat during the packaging.
    • Different production technologies for coil fed packaging machines
      and magazine fed packaging machines.

  • Production Support Techonologies

    • Ink, glue and lac preparation systems (Dispensing System)
    • Pre-print Mock-up and Model sample preparation technologies (Plotter)
    • Promotion (Coding for products produced by Rotogravure and/or Offset technologies)